Xylem Vogel LS / LC

all products

Product features

The Xylem Vogel ISO 5199 LS / LC series is the largest end suction process pump in the Xylem program. This pump is available up to a size with DN600 connections, which is good for 4600 m³ per hour. This entire series is available in many versions. There is a horizontally arranged end suction pump, which is also available for hot applications with centreline mount pump housing mounting. There is also a vertical well pump with insertion lengths up to 10 meters under the base plate. Most important features Horizontal end suction centrifugal pump with closed impeller, high hydraulic efficiency. Process design, back pull out for easy disassembly of impeller and bearing chair without disassembly of pump housing and motor possible (distance coupling required). Thrust bearing on drive side (double angular contact bearings) for high load capacity in both directions, roller bearing on pump side. Massive shaft size for low shaft deflection and robust oil-lubricated bearings for continuous use. Distance between the bearings is greater than the impeller overhang. Seal chamber with internal or external flush or cooled stuffing box. Mechanical seals according to EN 12756 (DIN 24960), internal single mechanical seals, double mechanical seals or cartridge seals. ATEX possible. Many materials -> standard cast iron, cast steel, stainless steel, duplex.

Product specs

Flowrate4600 m³ / hr
Head100 m
Request quote