Xylem Lowara borehole pumps – 4″ – 12″

all products

Product features

Borehole pumps for 4″ – 5″ wells

The Lowara e-SCUBA is a well pump for clean water. The majority of the components are made of AISI 304 stainless steel. The motor is placed above the pump part so that it is optimally cooled in every setup by the pumped medium. The electric motor is protected against water ingress by a double shaft seal with oil chamber. The mechanical seal is very durable.

Specifications

  • Flowrate: up to 7.50 m³ / h
  • Head: up to 80 m
  • Power supply: single and three phase 50 and 60 Hz
  • Power: from 0.55 kW to 1.10 kW
  • Liquid temperature: up to 40 ° C
  • Maximum immersion depth: 20 m
  • Free passage: up to 2.5 mm

 

In addition to the e-SCUBA, Lowara also has the e-GS. These stainless steel pumps are compact, robust and have limited resistance to abrasive liquids. The entire series can be linked to the corresponding 4 ”motors with the NEMA standard.

Specifications

  • Flowrate: up to 21 m³ / h
  • Head: up to 340 m
  • Power supply: single and three phase 50 and 60 Hz
  • Power: from 0.25 kW to 7.50 kW
  • Liquid temperature: up to 35 ° C
  • Maximum immersion depth: 300 m

Borehole pumps for 6″ wells

Lowara Z6 pumps are suitable for 6 “wells. This robust, lightweight stainless steel pump is easy to use and maintain thanks to its modular design. The pumps are highly resistant to the presence of sand in the water. The pump head and connection to the the motor is made of precision cast stainless steel and the impellers and diffuser are made of stainless steel.The pumps are suitable for applications in very deep wells, for pressure boosting, irrigation systems and for golf courses.

Specifications

  • Flowrate: up to 78 m³ / h
  • Head: up to 700 m
  • Power supply: three phase 50 Hz
  • Power: from 0.55 kW to 55 kW
  • Maximum pressure: 70 bar
  • Liquid temperature: up to 60 ° C
  • Maximum immersion depth: 350 m

 

Borehole pumps for 8″ wells

For medium to large capacity, Lowara has the Z8 series well pumps. Manufactured from cast stainless steel 304 (Z) or Duplex (ZR). Due to the highly efficient design, with minimal recirculation losses, almost every Z8 pump has a hydraulic efficiency of 80% or higher.

Specifications

  • Flowrate: up to 180 m³ / h
  • Head: up to 550 m
  • Power supply: three phase 50 and 60 Hz
  • Power: from 150 kW to 5.50 kW
  • Maximum pressure: 55 bar
  • Liquid temperature: up to 30 ° C
  • Maximum immersion depth: 350 m

 

Borehole pumps fot 10 – 12″ wells

The Z10 and Z12 series has been specially designed for high efficiency. The standard material for the Z10 and Z12 is stainless steel 304. This makes this series highly resistant to corrosion and wear. Another advantage of this material design is that the hydraulic efficiency of the pump is also guaranteed in the long term. In addition, the use of stainless steel eliminates the risk of contamination of the water by paint or rust. A full-duplex version is available for very aggressive media (e.g. seawater).

Specifications

  • Flowrate: up to 520 m³ / h
  • Head: up to 545 m
  • Power supply: three phase 50 Hz
  • Power: from 4 kW to 350 kW
  • Liquid temperature: up to 60 ° C
  • Maximum immersion depth: 350 m

Product specs

FlowrateUp to 520 m3/hr
HeadUp to 545 meter
Request quote